I got the wiring all squared away on the KLR project. It started up okay and tickover was fine but it wouldn't rev out. After a lot of faffing about, I removed the K&N jet kit and re-fitted the standard needle and jet and it runs pretty well.
I'll probably have another go with the K&N jet kit at some point in the future, maybe using smaller jets or lowering the needle, but for now it's fine.
So next up is painting the tank in two-pack satin black...
#StealthKLR #BlackOpsKLR #MurderedOutKLR #Mercenary #MercenaryGarage
I'll probably have another go with the K&N jet kit at some point in the future, maybe using smaller jets or lowering the needle, but for now it's fine.
So next up is painting the tank in two-pack satin black...
#StealthKLR #BlackOpsKLR #MurderedOutKLR #Mercenary #MercenaryGarage
No comments:
Post a Comment
Leave a Comment...